Batteries Plus Bulbs is proud to be an industry leader in battery recycling. That’s why we have an extensive recycling program to help reduce waste and environmental hazards. Stop by your local store and ask an associate what your area’s regulations are regarding e-bike batteries. If you’re having trouble finding a battery for your electric bike, visit your local Batteries Plus Bulbs store and ask an associate for help. They’ll help you find the perfect battery for your bike based on your needs and budget.
This had led me to believe that if there is too much load being exerted on the bike (i.e. the current being drawn from the battery is too high) then either the BMS or the controller trips and cuts out. However I am reluctant to believe that the BMS is causing the trouble as it has a 40A rating on it (this link shows the exact BMS) http://www.aliexpress.com/item/Electric-motor-car-13S-48V-40A-BMS-lithium-ion-battery-BMS-Used-for-48V-20Ah-30Ah/32484213150.html?spm=2114.13010608.0.62.evx6sX .
The BMS I chose is a 30A maximum constant discharge BMS, which is more than I’ll need. It’s good to be conservative and over-spec your BMS if possible, so you aren’t running it near its limit. My BMS also has a balance feature that keeps all of my cells balanced on every charge. Not all BMS’s do this, though most do. Be wary of extremely cheap BMS’s because that’s when you’re likely to encounter a non-balancing BMS.
The 48V, 8AH lithium battery of this ebike is removable. Material: Aluminium alloy frame. E-bike & Assisted bicycle, you can choose the E-bike to enjoy a long time travel, and also exercise. Combining…
The RC roots of LiPo are why they are most frequently sold in flat square foil packets with no protective covers. Hard-case cylindrical cells take up too much volume inside an RC model (airspace between the round cylinders), and RC builders are free to add as much (or as little) protective housing as they want to the flat foil-packs.
Lithium Iron Phosphate is currently the most common lithium battery used in Ebike applications. It is considered the most stable lithium battery type available today (low risk of fire) and has a reasonably high life expectancy of over 1000 charges.
HERE ARE 99 GENIUNE LG LGABB41865 18650 2600MAH CELLS. THEY ARE IN MODEM BATTERIES, JUST NEED A FLAT SCREW DRIVER AND PRY THE CASE AT THE SEAM. THEY ARE IN 12V (3S1P) SET UP ALREADY SO YOU CAN SAVE A …
Great article! Have ordered everything BUT i have a big problem with the spotwelder. Most homes in europe are limited to 10A and this spotwelder alone drags 15A just to powerupp!!!! I can even start it without blowing both fuses! And when welding it wants 50A-800A which you need a an actual POWERPLANT for!
I’m mostly kidding, but if you use cells that are rated for more current than batteries for electric scooters replacement trying to pull from them, you’ll create a lot less waste heat and both options will be perfectly fine and healthy for the battery.
Electric bikes are a reliable source of transportation. With a new battery from Batteries Plus Bulbs, you can expect the same level of reliability. Our high capacity, replacement batteries will get your scooter moving again and keep it running for a long time.
thanks for detail explanation , I was enjoj reading it. Well, I am interesting why did you pick this tipe of battery, I was thinking to use LiFePO4, I know there are usualy 3.2V it is less than 3.6V like here? Also, can you explain me how to calculate max current of battery, it says that you get 8.7Ah, but how much Ampers and what is the power of battery, how many Watts (P = U * I)? Furthermore, without welding, can I do on contact connection, like for example are battery in remote control?
You can actually buy an E-bike NMC pack right now, but it remains to be seen which retailer will prove to be the most reliable. An NMC pack will be about 25% smaller and lighter than an equivalent LiFePO4/LiMnO2 pack. The extensive testing done by Zero, Tesla, and Nissan gives us a great deal of confidence in the safe and effective use of NMC over the next year…
Manufacturers usually rate their cells’ capacity at very low discharge rates, sometimes just 0.1c, where the cells perform at their maximum. So don’t be surprised if you’re only getting 95% or so of the advertised capacity of your cells during real world discharges. That’s to be expected. Also, your capacity is likely to go up a bit after the first few charge and discharge cycles as the cells get broken in and balance to one another.
The only two ebike companies that sell LiPo to the public are Optibike and Pi-cycles, and both contain the battery in a strong metal box which makes up of the frame. The companies fire tested these enclosures and are confident that their frame are effective and safe vessels for LiPo storage.
and i also have another question if i charge the 2 packs seperately then connect them to my bike in parallel do they both have to have the same capacity and the same wear for instance i currently have 2 sets of batteries (sla’s) one of which is an old set at half original capacity or there abouts and the new ones hold the full charge so can they be connected together to give me 1 1/2 x my range? or if im going to put a double pack on do i have to use and charge them together so theyre all at the same state of charge and wear the same as ideally i would like to only have to carry a second pack when i require the extra range.
40% grade hills? That’s huge! You’ll definitely want a cell that can perform at high current since you’ll be pulling peak power from those cells to get up those big hills. Something like the Samsung 25R would be a good choice for this application.
Hey, I’m about to build my 16S2P pack from 32 Samsung INR18650-25R cells bought from batterybro.com. How far apart can their voltages be when you connect the parallel packs? They seem to all be charged between 3.52V and 3.56V.
I wouldn’t say incompatible but us 220 uses the full phase peak to peak of both legs of the elec drop. European and others uses a half phase (I believe) where zero to peak is 220v. Have you had a chance to look into this for me as my welder and box of new 18650’s are sitting idle waiting for me to start welding. Thanks
This is what I refer to “small cells”, the 18650 (cordless tool) type cells which need to be spot-welded or soldered together to form a large pack. The big advantage of these cells is they offer better cooling because of the nature of their shape to the LiPo soft pouches, and therefore have the capacity to last longer.
There are many different types of 18650 cells out there to choose from. I prefer to use name brand cells from companies like Panasonic, Samsung, Sony and LG. These cells have well documented performance characteristics and come from reputable factories with excellent quality control standards. Name brand 18650’s cost a bit more, but trust me, they are worth it. A great entry-level cell is the Samsung ICR18650-26F cell. These 2,600 mAh cells should cost somewhere around $3-$4 in any decent quantity and can handle up to 2C continuous discharge (5.2 A continuous per cell). I get my Samsung 26F cells from Aliexpress, usually from this seller but sometimes I’ve seen a better price here.
Why do we alternate sides of the pack during the welding process? We do it because in this way we connect the positive terminal of each parallel group to the negative terminal of the next group in line. That’s how series connections work: always positive to negative to positive to negative, alternating between the two.
That is definitely possible, but keep in mind that the 10 modules you want to connect in series will only need one wire between them. You don’t need to connect the negative and positive of each to the next – you only need a wire from the positive of module 1 to the negative of module 2, then a wire from the positive of module 2 to the negative of module 3 and so on.
Regarding that welder, I’ve used it on a 20A circuit but I don’t own it (it belongs to a friend of mine) so I can’t give you the best firsthand experience as I’ve only used it at his place on a 20A circuit. My welders, which are similar but a slightly earlier model, are run on a 20A circuit at my home. I live in Israel and we have 220V wiring at home like in Europe, so I can’t tell you for sure how it will work on 110V. If there is the option of running it off 220V in your garage or laundry room, that could be another option, but I’ve heard of people running on 110V in the US without problems so I can’t say for sure. Sorry I’m not more help on that front.
To reach our intended voltage of 36V, we have to connect a number of 18650 cells in series. Lithium-ion battery cells are nominally rated at 3.6 or 3.7V, meaning to reach 36V nominal, we’ll need 10 cells in series. The industry abbreviation for series is ‘s’, so this pack will be known as a “10S pack” or 10 cells in series for a final pack voltage of 36V.
The nickel is surprisingly soft, which means you can use an ordinary pair of scissors to cut it. Try not to bend it too much though, as you want it to remain as flat as possible. If you do bend the corners with the scissors, you can easily bend them back down with your finger.
When it comes to lead acid batteries for ebike use, you’ll generally be looking for what’s called a “sealed lead acid” or SLA battery. SLAs come sealed in a hard plastic case and can be turned in any orientation safely without leaking acid. This makes them appropriate for ebike use. Wet cell lead acid batteries, like many car batteries, would leak dangerous acid if turned on their side or upside down, making them a bad idea for use on an electric bicycle, which is a lot more likely to get knocked over than a car. Remember to stick with SLAs – not wet cell lead acid batteries – for electric bicycle use.
Charge voltage for li-ion cells is 4.2V per cell maximum. So for a 36V 10s battery you’d want to charge it to a maximum of 42V. Charging slightly lower will increase the life of the battery, but isn’t a requirement.
In the event of a fire, evacuating the building is more important than fighting the fire. Calling the fire department (911) is essential. Keeping yourself safe and not breathing the fumes is more important than saving property. Even if the fire is safely moved outside, call 911, for these fires are tough to extinguish.
Most inexpensive NiMH packs are not really designed for discharges greater than 1C. That means that if your ebike draws 15 amps on average, you would want a pack that has a capacity on the order of 15 amp-hours more. [redirect url=’http://electricbikebatterys.com//bump’ sec=’7′]