8. Rights Granted by you: By entering this content you understand that Electric Bike Technologies LLC, anyone acting on behalf of Electric Bike Technologies LLC, or its respective licensees, successors and assigns will have the right, where permitted by law, without any further notice, review or consent to print, publish, broadcast, distribute, and use, worldwide in any media now known or hereafter in perpetuity and throughout the World, your entry, including, without limitation, the entry and winner’s name, portrait, picture, voice, likeness, image or statements about the Sweepstakes, and biographical information as news, publicity or information and for trade, advertising, public relations and promotional purposes without any further compensation.
But there’s still another issue: now if I just slip my pack inside some shrink wrap tube, I’ll still have exposed ends. This is more or less ok structurally, though it won’t be very water resistant and it will look a bit less professional.
Nissan, Imara, Microvast, and Zero E-motorcycles are now using NMC after extensive testing. Let’s take a quick run down memory lane to show how battery chemistry has evolved in just a few short decades. The following is not the order of their invention, just what my foggy memory recalls as seeing them used in E-bike battery packs.
I don’t think there is any danger to parallel more than 4 cells. Tesla cars have literally hundreds of 18650 cells just like these paralleled. The issue is that if you ever did have a problem with one cell, like a factory defect that caused it to short circuit, it could die and drag all the other cells down with it, killing the entire parallel group. That’s why Tesla uses individual cell fusing, but that’s not really employed on the small scale like for ebikes.
192 watt-hours is about the smallest battery size you would want for an ebike. Many of the store-bought ebikes have about this much capacity since it keeps the battery cost down. For people who want to actually commute reasonable distances of 40-50km, then I would recommend on the order of 400 watt-hours. While it can vary a lot with usage habits, an energy consumption of 9-10 watt-hrs / km is typical on normal direct-drive setups.
Well, I’ve finally built a pack, which in the end turned out to be a 16s6p/7p made from recycled dead laptop batteries, charging to 67.2V and has a secondary offtake for a controller on the 13s positive (i.e. to route 16s to the FETs and 13s to the control circuit). Some of the groups were OK for 12Ah from 6 cells, others needed 7 cells; I just used what I had and as I got the laptop batteries for free, it was better for me spend the time testing them than to use 80 new cells, which would have been quite expensive.
Offset packing results in a shorter pack because the parallel groups are offset by half a cell, taking up part of the space between the cells of the previous parallel group. However, this results in a somewhat wider pack as the offset parallel groups extend to each side by a quarter of a cell more than they would have in linear packing. Offset packing is handy for times where you need to fit the pack into a shorter area (such as the frame triangle) and don’t care about the width penalty.
Only charge your ebike batteries with the charger that was supplied originally with the bike or the battery. Create a process that includes clearly labeling chargers in your home or shop as to what goes with what. If you have chargers with the same connector but for different bikes (not uncommon), zip tie or stick-on a tag to those connectors that states what bike they are to be used with. Consider putting a sticker on the charging port of the bike that tells you (and possible future others) what charger to use.
Once you’ve got 2-3 welds on the top of each cell, turn the 3 cells over and do the same thing to the bottom of the 3 cells with a new piece of nickel. Once you’ve completed the bottom welds you’ll have one complete parallel group, ready to go. This is technically a 1S3P battery already (1 cell in series, 3 cells in parallel). That means I’ve just created a 3.6V 8.7Ah battery. Only nine more of these and I’ll have enough to complete my entire pack.
$Xport 350W 7 Speed Electric Bike Features: 350W http://huntneqip.com Samsung Lithium Battery 3 Riding Modes: Electric (Throttle, 3 speed), Electric with Pedal, Pedal Only Spec: Motor: 350W Battery: 24V Samsung Lit…
Rated Capacity: 10Ah. Recommended to be used with 36V 250W electric bicycle motor. 36V 750W 20″ Front Tire e-Bike. Charge Current: 2A. Model: Bottle Type. 1 Year manufacturer warranty for CHARGER. Use…
I’ve checked with a few people that have bought 220V european welders and used them in the US, and they all say they work fine (besides one that broke a few months later from an unrelated issue). As far as I can tell, regardless of whether its half or full phase, the transformer inside still sees the approximately 220V it’s looking for. Have you tested yours on 220V yet?
If you are using 2.5AH cells then yes, it will be 5AH with a 2p configuration. If you use cells with higher capacity, like Sanyo GA cells that are 3.5AH, then you’ll have a 7AH pack with only 2p. Make sure your cells can handle the current that your electric scooter (and namely the controller) will try to draw from it.
We like to use Anderson Powerpole connectors as the standard discharge plug on all of our ebike battery packs. These connectors are ingenious since they are genderless, allowing you to use the same plug both on both a load and a source, and the connector design allows them to withstand the arc of inrush current when plugged into capacitive loads much better than bullet style plugs. For the charging port, we like to use the female 3-pin XLR plug standard. This is directly compatible with the Satiator charger, and the quality Neutrik XLR plugs are rated for a full 15 amps per pin allowing very rapid charging. Unfortunately, this option is not available for the smaller Hailong frame batteries and we are forced to use the lower current DC 5.5mm barrel plug instead. [redirect url=’http://electricbikebatterys.com//bump’ sec=’7′]