Month: October 2018

“lithium ion battery for electric bike -bike battery price”

There are formulas out there for calculating the exact size of heat shrink you need but I often find them overly complicated. Here’s how I figure out what size I need: take the height and width of the pack and add them together, and remember that number. The size of heat shrink you need when measured by the flat width (half the circumference) is between that number you found and twice that number (or ideally between slightly more than that number to slightly less than twice that number). When you series connect batteries, you want to make sure they are packs with identical capacity and specs. You also want to make sure that either your controller or Cycle Analyst low voltage cutoff is set such that the discharge stops as soon as one pack trips. Otherwise continuous current will continue to flow through the pass diode when you are running off just the one non-tripped battery, causing the diode to overheat and fail. Here at Grin we’ve been dealing with ebike batteries for a very long time during which we’ve offered over 100 variants of NiCad, NiMH, LiFePO4, LiPo, and Lithium-Ion packs in all kinds of voltages, geometries, and capacities. It’s been a love/hate relationship over those years, but the more recent mass production of 18650 lithium cells for high power consumer goods like power tools has shifted things to the love side,...

Read More

“lithium bike |36v battery for electric bike”

Batteries Plus Bulbs is proud to be an industry leader in battery recycling. That’s why we have an extensive recycling program to help reduce waste and environmental hazards. Stop by your local store and ask an associate what your area’s regulations are regarding e-bike batteries. If you’re having trouble finding a battery for your electric bike, visit your local Batteries Plus Bulbs store and ask an associate for help. They’ll help you find the perfect battery for your bike based on your needs and budget. Now the game plan here is to weld parallel groups of 3 cells (or more or less for your pack depending on how much total capacity you want). To weld the cells in parallel, we’ll need to weld the tops and the bottoms of the cells together so all 3 cells share common positive and negative terminals. I should really change that $2 cutoff to more like $2.50, which is more reasonable for quality cells. Basically, the cheapest ‘good’ cells are Samsung 26F cells, which can be had for usually around $2.50 – $2.90 if you are buying in any large quantity, like at least 100. Expect to pay more like $3.00 or so if you’re buying only 40 cells. 26F cells are also limited to 5A discharge though, so you’ve got the same issue as with the NCR18650B cells from Panasonic. Spot welders for...

Read More
  • 1
  • 2