I think it is much better to use a purpose built CV-CC (constant voltage, constant current) ebike charger. I 100% understand the desire to complete the project on the cheap, but I think that sometimes it is worth a few extra bucks as insurance to protect your battery which is worth many hundreds of dollars.

If you are thinking about building your own LiPo pack, a 48V / 10-Ah battery pack can be made for around $300. However to undertake this project you should research extensively on www.endless-sphere.com on how to build and take care of your pack. Expect hours of reading before you are ready to build a pack of your own.

I’m not sure what cells exactly you’ve got there, but a good replacement cell (assuming it has similar specs to your cells, which you’ll have to confirm) could be the Samsung 26F cell. It’s a good quality economical battery cell. I’ve gotten them from here and had great experiences with the vendor: Samsung 26F 18650 lithium battery cells

And a final point is that a larger battery has a lower per cell stress during discharge, since the current is shared among more parallel cells. Cells that are cycled at high discharge curents (>1-2C) also exhibit lower cycle life than those cycled at low currents

9. Terms: Electric Bike Technologies LLC reserves the right, in its sole discretion to cancel, terminate, modify or suspend the Sweepstakes should (in its sole discretion) a virus, bugs, non-authorized human intervention, fraud or other causes beyond its control corrupt or affect the administration, security, fairness or proper conduct of the Sweepstakes. In such case, Electric Bike Technologies LLC may select the recipients from all eligible entries received prior to and/or after (if appropriate) the action taken by Electric Bike Technologies LLC. Electric Bike Technologies LLC reserves the right at its sole discretion to disqualify any individual who tampers or attempts to tamper with the entry process or the operation of the Sweepstakes or website or violates these Terms & Conditions.

This is the old technology for e-bikes that is heavy as bricks and does not have longevity. Lead acid will double the weight of your electric bike. Unless you have to because of money restraints, we advise to steer way clear of lead acid batteries.  Your bike will have a completely different feel and range if you spend the money on one of the new lithium technologies.

Do you have any charts showing the different weights by voltage for lead acid vs lithium? It would be good info to be able to see the penalty paid for cheap lead acid in a mid level build when compared to the equivalent lithium setup.

Yes, you can upgrade a GIO PB710 with a lithium battery. You just want to make sure your battery is the same voltage as the original lead acid battery and that it can handle the current demanded by the bike’s controller.

Lastly, regarding the spot welder. I actually prefer to use the kind like you said, with the two arms that lift up and provide equal pressure at each weld. The kind with two long welding cables like this welder has both options which is nice, especially for if you need to reach to the middle of a pack to make a repair or if you missed a weld. I mostly use the short rigid arms though and just weld one row at a time before adding more cells – that way I can reach all the cells with the short arms.

However… I’m thinking about extending the range of my 250W ebike (a Greenedge CS2) by wiring a battery in parallel as a one-off project. My thinking is that as it would halve the load on each of the batteries, it would reduce output current and voltage drop under load. This I’m thinking would allow use of a simpler constructions, since the stress on each cell would be reduced.

Lithium batteries are also small enough to allow you to place your batteries pretty much anywhere on your bike. This is especially true for people who want to assemble their own pack or use heat shrink wrapped lithium batteries instead of hard case lithium batteries with prefabricated bicycle frame mounts. This can help spread the weight around or hide the batteries to make a stealthier bike.

A very affordable 13S BMS that I like is this 30A version, though it can take a few weeks or even a month to arrive since it’s coming all the way from China. http://www.aliexpress.com/item/13-lithium-battery-protection-board-48v-lithium-battery-BMS-30A-continuous-60A-peak-discharge/1741121963.html

Whether you’re shopping for a turn-key commercially available electric bike, or trying to find or build a good battery for an e-bike conversion, being able to find the right battery for an electric bike is a difficult task.  The batteries for electric scooter battery pack is the most difficult part of the e-bike equation. Keep in mind that even if you’re buying a turn-key electric bike, the lithium battery is more than likely the most expensive component in it, and…not all lithium batteries are created equal, so you should know what you are getting before you buy the ebike. [redirect url=’http://electricbikebatterys.com//bump’ sec=’7′]